Magnet down? Don’t replace it restore it.
Certified performance, back at a fraction of the cost of new.
A burnt-out coil, a drop in lifting capacity, or years of wear on the line whatever has taken your magnet out of service, Reflux Magnets brings it back to certified, as-new performance. All makes, all models, across India. Fast.
Why Repair?
Replacing a magnet isn’t always necessary. Here’s when repair or refurbishment is the smarter call
A Fraction of New Cost
Restoring an existing unit costs far less than buying new. Your worn magnet almost always has more service life left in it than you’d expect.
Extend Equipment Life
Recoiling, rewinding, and rebuilding worn components adds years of reliable duty to a magnet you already own protecting your original investment.
Faster Than a New Build
New magnet orders take weeks. A repair turns your existing unit around far quicker, getting you back into production with minimal downtime.
Restored to Certified Performance
Every repaired unit is load-tested and kN-validated before it leaves our facility. You get the same certified standard as a new magnet.
All Makes & Models
We repair and refurbish electromagnets from any manufacturer not just our own covering circular, rectangular, excavator, and suspension types.
What We Repair & Refurbish
From coil failures to full mechanical rebuilds, we restore every type of industrial electromagnet to certified working condition.
Circular Lifting Electromagnets
- Coil rewinding and recoiling for scrap, steel plant, and foundry duty units
- Bottom plate and manganese wear-plate replacement
- Full strip-down refurbishment to restore rated lifting capacity
Rectangular Lifting Electromagnets
- Recoiling and insulation rebuild for billet, slab, and plate-handling magnets
- Structural and weld repair for heavy-duty operations
- Performance restoration to original specification
Excavator Magnets
- Coil, junction box, terminal, and cable repairs
- Service for battery-operated, hydraulic, and generator-powered variants
- On-site assessment and support for scrap and demolition fleets
Oil-Cooled Suspension Electromagnets
- Oil seal replacement and cooling system overhaul
- Coil rewind for continuous separation duty
- Tramp iron performance restoration
- Casing inspection and repainting
Air-Cooled Suspension Electromagnets
- Fan motor and cooling system servicing
- Coil rewind with high-temperature insulation
- Duty cycle recalibration
- Performance restoration to rated separation efficiency
Common Repairs We Handle
- Burnt-out and failed coil rebuilds
- Coil rewinding, recoiling, and insulation replacement
- Loss-of-lifting-capacity diagnosis and correction
- Bottom plate, wear plate, and pole repair
- Junction box, terminal, and cable replacement
- Structural, weld, and casing repair
Industries Served
Our repair and refurbishment work keeps magnets running across India’s most demanding industrial environments.
Steel Plants & Foundries
Coil and structural repairs that restore lifting capacity on shutdown-critical magnets, minimising line downtime.
Cement & Coal Handling
Suspension magnet repairs and re-sealing to bring tramp-iron separation back to full performance.
Scrap Yards & Recycling
Refurbishment of excavator and circular magnets worn by constant, high-impact scrap-handling duty.
Demolition & Construction
Fast-turnaround repairs for excavator magnets exposed to harsh, abrasive site conditions.
Power Plants
Magnet restoration for scheduled maintenance windows and unplanned equipment failures.
Logistics & Warehousing
Refurbishment of ferrous-handling magnets to extend service life across material-handling operations.
How the Repair Process Works
Simple, transparent, and fully supported – from first enquiry to a certified magnet back in service.
Tell Us What’s Wrong
Share your magnet type, the fault or symptoms, and your location via WhatsApp or our enquiry form. We’ll advise the next steps right away.
Inspection & Diagnosis
On arrival, your magnet undergoes a full electrical and mechanical inspection to identify every fault, from coil and insulation condition to structural wear.
Condition Report & Quote
You receive a clear report on the magnet’s condition, with a detailed cost and lead time. No work begins until you approve.
Repair & Refurbishment
Our team carries out the approved work recoiling, rewinding, component replacement, and structural rebuild to original specification or better.
Load Test, Certify & Return
Every repaired unit is load-tested, kN-validated, and supplied with a performance report, then returned to you ready to resume service — backed by our service warranty.
Frequently Asked Questions
We handle burnt-out and failed coils, insulation breakdown, loss of lifting capacity, worn bottom and wear plates, damaged junction boxes, terminals and cables, and structural or weld damage across all magnet types.
Yes. We repair and refurbish industrial electromagnets of all makes and models, not only those built by Electro Flux and Reflux Magnets.
Turnaround depends on the fault and the magnet type, but a repair is almost always faster than ordering a new unit. We confirm an exact lead time with your condition report and quote.
Yes. Every repaired unit is load-tested and kN-validated to its rated capacity before dispatch, and supplied with a performance report confirming the result.
Yes. Our repair work is backed by a one-year service warranty a level of post-service assurance that’s rare in this industry.
After inspection, we’ll give you an honest recommendation. If a unit is beyond economical repair, we’ll say so and can discuss a new build or an exchange.